CN

  Reverse Osmosis is the reverse process of osmosis and is driven by pressure.

  Pressure is applied to the feed water, when the pressure is higher than osmotic pressure, the solvent will reverse permeate against the natural penetration direction. Thus the penetrant water will be achieved at the lower membrane side and the concentrated solution will be achieved at the higher pressure side.

  The RO system normally consists of security filter, high-pressure pump, RO membrane, membrane wall, automatic valve, operating system and monitoring device. The penetrant water is product water directly, and the conductivity is usually < 10μS /cm

Specification parameter:
Level 1RO Model RO Quantity Capacity Power Membrane Wall material Floor Space (L ×W×H)
BWRO1.0-4040×4I 4 1.0 m³/h  3 kw  SS  4000×3000×3500mm
 BWRO2.0-4040×8I 8  2.0 m³/h  4 kw  SS  4500×3500×3500mm
 BWRO3.0-4040×12I 12   3.0 m³/h  5 kw  SS  7500×3500×3500mm
 BWRO4.0-4040×16I 16  4.0 m³/h  6 kw  SS 9000×4000×3500mm
 BWRO5.0-8040×5I 5   5.0 m³/    6.5kw     FPR       9000×5000×4000mm
 BWRO10.0-8040×10I 10 10.0 m³/h 12 kw  FPR  9000×6000×4000mm
 BWRO15.0-8040×15I 15 15.0 m³/h 18kw  FPR 12000×7000×4200mm
 BWRO20.0-8040×20I 20 20.0 m³/h 22kw  FPR 13000×7000×4500mm
 BWRO30.0-8040×30I 30 30.0 m³/h 28kw  FPR  16000×7500×4500mm
 BWRO60.0-8040×60I 60 60.0 m³/h 55 kw  FPR    18000×10000×4500mm